Find NRS Gate Valve, High Quality NRS Gate Valve, NRS Gate Valve Details on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.
New Products
Model No.: Z45X
DIN3352 F4 resilient seated jacket Gate valve
SpecifPlaication:
Epoxy fusion coating.
Pressure and Temperature ratings:
Materials
Product Description
Jinbin valve's Series Z45X ductile iron resilient wedge gate valves are suitable for use in potable water, sewage and fire protection systems. These valves have a rated working pressure of 25 bar with zero leakage. The waterway is clear and unobstructed.
Advantages Over Butterfly Valves
No disc in waterway to restrict flow or to increase pumping costs
Allows passage of pigging devices
Internal parts can be serviced without cutting valve out of pipeline
25bar rating provides for future pressure increases over the 16bar pressure rating typically found on most butterfly valves
Advantages Over Double-Disc Gate Valves
Zero allowable leakage
Lower torque requirements to operate valve
25 bar pressure rating compared to the 16bar rating typically found on double-disc gate valves
Epoxy-coated inside and out
Lighter total valve weight
Single-gate construction. Double-disc gate valves have multiple parts that can seize together.
Bypasses, rollers, tracks and scrapers are not needed.
Standard Features
Ductile Iron Construction
25bar rating
Triple O-Ring stem seals
Epoxy coating inside and out
Thrust washers
Lifting Devices
Zero leakage
Dual sealing body to bonnet gaskets
EPDM Encapsulated Ductile Iron Wedge With Polymer Guide Covers
Optional gearing (Standard on 20" and larger)
Bypass available at additional cost
Benefits
Ductile Iron Construction
The ductile iron body and bonnet provide superior strength and allow a pressure rating of 25bar. The strength of ductile iron is more double that provided by gray iron. This added strength and higher pressure rating are provided in a compact, lighter design.
25 bar Pressure Rating
Our facilities are subject to periodic inspections to assure we are in compliance with their standards.
Triple O-Ring Stem Seals
Sealing the lubrication chamber is a series of O-Ring stem seals. The two O-Rings above and one below the stem thrust collar help to isolate the lubrication chamber.
Epoxy Coating Inside and Out
A fusion-bonded epoxy coating is electrostically applied to the interior and exterior of the valve body to help ensure corrosion resistance for a long service life. The coating is applied to all ferrous surfaces after the valve body is shot-blasted clean.
Thrust Washers
Thrust washers are located above and below the stem collar to reduce operating input torque and assist in trouble-free operation of the valve.
Lifting Devices, 14"-64"
All 14"-64" valves are provided with integral lifting devices, which allow the valve to be properly handled without lifting it by the operating nut.
Zero Leakage
Every valve is seat and shell tested after assembly to ensure its rated performance and that the seating mechanism is leak-tight.
Dual Sealing Body to Bonnet Gaskets
The body to bonnet gasket utilizes a unique dual sealing design which incorproates the reliabilty of a flat gasket and an integral pressure energized O-Ring seal.
EPDM Fully Encapsulated Ductile Iron Wedge With Polymer Guide Covers
Helps to ensure zero leakage with low stem torques.
Optional Gearing
Gearing allows for reduced torques and the ability to accomodate lower depths of bury.
Contact us if you need more details on Jacket Gate Valve. We are ready to answer your questions on packaging, logistics, certification or any Other aspects about Reslient Seat Gate Valve、Resilient Wedge Gate Valve. If these products fail to match your need, please contact us and we would like to provide relevant information. Product Categories : Gate valve > NRS gate valve
